Baler Tukan

One always wants to save collected grass mass fresh and nutritious. Baler Tukan is designed for this purpose: it picks up hay rollers of natural and sieved grass or straw, presses grass mass into rectangular bales and winds them with string. All steps of the work of machine are extremely efficient: picking up, pressing, discharge of bales. “Economy” is the key word at functioning of the press-pickup. Economy of time, labor expenditures, energy resources. Baler will not let you down even at the moments of hitting of foreign objects into mechanism- protection systems will reliably work out. The machine is used everywhere excluding mountainous regions. Even light corns of plants will be suitable for bale forming- special system of density regulation is installed in the machine.

	Good performance of winding mechanism German winding mechanism is simple in installation-specific settings, reliable, supports good performance.
	Protection from damage and perfect coupling properties Adhesion between gear strap and polyurethane bush is reached due to high friction coefficient of polyurethane in which the bar presses cavities, which are further restored due to elastic properties of polyurethane. So, at the moment of return of gear strap to starting point, when it falls from the upper point to the low one, semicircular teeth do not damage polyurethane bush and do not worsen its coupling properties.
	Convenience of exploitation The pickup is lifted and lowered from the cabin of tractor by switching-on of a hydraulic distributor lever, what supports convenience of exploitation.>
	Prevention of destruction of the pickup Torsion torque is passed to the pickup by the belt transmission, which does not require grease, and in the case of locking of the pickup by large mass or a foreign object it sneaks on the sheave, preventing destruction of driving gear and the pickup itself.
	Quality bales at lowered transport expenses Integral pressing chamber lets to reach higher density of pressing, that increases capacity and decreases transport expenses.
	Durable work of PTO and coupling device Presence of counterbalance in crank mechanism lets to extinguish inertial forces that appear during moving of a forcer. As a result tractor moves evenly and smoothly.
	Economy of time and labor expenditures Baler may be completed by discharging device and option of roll counter, usage of which saves time and allows to optimize processes of machine work.
	Durable work without stops There is possibility of installation of up to 8 rolls of string, that permits to work without stop for additional loading during the whole shift and consequently saves time.
	Exclusion of overloads At the driving gear of winding device shear bolt is installed. It protects mechanism from damage caused by overloads in the following possible cases: too high density of bales string at winding unit got tangled During moving, pins were hampered by a foreign object Pins bent and seized up in winding mechanism
	Durability of driving gear work Free-wheel protecting clutch is installed at baler, it passes torsion torque from cardan shaft to flywheel. At switch off of PTO of tractor flywheel goes on to rotate mechanically, at that moment free-wheel clutch snaps into action, and rotation of flywheel is nit passed to stopped PTO. Protecting clutch softens the blow at switch on of PTO of tractor. It increases durability of driving gear work.
	Convenient service Service of the machine is considerably simplified due to convenient location of points of grease.