Roll baler Pelikan

Advanced opportunities of roll baler Pelikan will be to liking of all agricultural producers. It is meant for picking up of rollers of hay, natural or sieved grass ot straw, pressing them into rollers with further winding by string. Harvesting of hay with high dampness  is also possible for additional fertilizing provision. Even degree of pressing supports long storage of forage. This criterion is one of the most important at choice of roll baler. Using Pelikan you obtain ideal regular rolls which do not go to pieces  and settle.

Quick discharge of ready rolls, efficient lifting of pressing chamber will help to reduce time of work. Easiness of control and supervision of work let not to worry about the course of process.

It is unitized with tractors of trailer class 1,4 t.f.

	Roll of the highest density Shafts in the front part and slatted chains in the back part of press-pickup create roll of the highest density. Even if the material is in a very dry or wet condition, combined scheme forms stably and presses roll compactly. Presence of 2 systems in press-pickup provides the following advantages: Slatted chains in the back part start to roll up a roller very early due to what the kernel is denser Roll in the front part put rolls into optimal form and provide high density of pressing at the end of the process of roll forming
	Quick winding mechanism Double winding mechanism works by 67% quicker than the single one. Due to this productivity of roll baler Pelikan is increased by 30%.
	Absence of moments drawing away from control of tractor With the help of direct control board in the cabin of tractor one may easily supervise filling of pressing chamber, switch on and control winding, and also show the moment of opening and close of pressing chamber. So, a mechanic does not digress for visual supervision of pressing devices and can focus his attention on control of tractor.
	Quick lifting of pressing chamber Hydraulic cylinders of pressing chamber have cross-section with diameter 50 mm. It lets to reduce the time for lifting up to 4 seconds- this is by 60% quicker than with hydraulic cylinders with diameter 80 mm.
	Efficiency of discharge of a roll Due to the slide with strong springs, roll easily roll away beyond the limits of trajectory of pressing chamber closing, and it is not necessary for tractor-driver to drive back at discharge. The result- time of discharge is only 8 seconds.
	Protection of pressing chamber from damage Pickup of large diameter helps to avoid hitting if stones and foreign objects into pressing chamber.
	Reliable work and security in case of emergency Imported cardan shaft with protecting clutch provides reliable transmission.
	Registration of capacity Press-pickup can be supplied with the option of roll counter.
	Quick service Pelikan has convenient access to all six points of grease.